Ricoh M0A0 User Manual

3.Appendices: SP Mode Tables
135
With an ADF that can scan both sides simultaneously, the Front side count is the same as the number of
pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count is the same as the number of
pages fed for duplex front side scanning. (The front side is determined by which side the user loads face up.)
002
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as the number of pages fed
for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as the number of pages
fed for duplex rear-side scanning.
 When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
 If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the pages are
not counted if the jam occurs before the first sheet is output.
8231
Scan PGS/Mode
*CTL
[0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by each ADF mode to determine the work load on the ADF.
001
Large Volume
Selectable. Large copy jobs that cannot be loaded in the ADF at one
time.
002
SADF
Selectable. Feeding pages one by one through the ADF.
003
Mixed Size
Selectable. Select "Mixed Sizes" on the operation panel.
004
Custom Size
Selectable. Originals of non-standard size.
005
Platen
Book mode. Raising the ADF and placing the original directly on the
platen.
006
Mixed 1side/2side
Simplex and Duplex mode.
 If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is
done for the last selected mode.
 The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's page sizes are
mixed or non-standard, these are not counted.
 If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.
 In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the Platen count
is 1 and the SADF count is 3.
8241
T:Scan PGS/Org
*CTL
[0 to 99999999/ 0 / 1/step]
These SPs count the total number of scanned pages by original type for all jobs, regardless of which
application was used.
8242
C:Scan PGS/Org
*CTL
[0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by original type for Copy jobs.
8243
F:Scan PGS/Org
*CTL
[0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by original type for Fax jobs.
8245
S:Scan PGS/Org
*CTL
[0 to 99999999/ 0 / 1/step]

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English