Ricoh M0A0 - Page 538

3.Appendices: SP Mode Tables
170
bit
3
DFU
-
-
bit
4
DFU
-
-
bit
5
Change the user ID type displayed on the operation panel
0:Enabled
1:Disabled
As of 15S models, the Login User Name can be displayed on the operation panel.
The user ID type displayed on the operation panel can be changed by configuring BitSwitch #12-5
as follows:
 0 (default): Login User Name
 1: User ID. If this is enabled, User ID will be displayed, which is equivalent to the behavior
exhibited in 14A and earlier models.
bit
6
Ability to use AirPrint
Enabled
Disabled
For 15S and later models that support AirPrint, AirPrint can be disabled by changing this Bit Switch
from 0 (default) to 1.
bit
7
DFU
-
-
1003
[Clear Setting]
001
Initialize Printer System
*CTL
[- / - / -]
[Execute]
Initializes settings in the "System" menu of the user mode.
003
Delete Program
*CTL
[- / - / -]
[Execute]
1004
[Print Summary]
Prints the service summary sheet (a summary of all the controller settings).
001
Print Printer Summary
CTL
[- / - / -]
[Execute]
002
Print Summary2
CTL
[- / - / -]
[Execute]
1005
[Display Version]
001
-
CTL
[ - / - / - ]
Displays the version of the controller firmware.
1007
[Supply Display]
Sets displaying remaining supply amount information or not.
0: Displays remaining supply amount information