Ricoh M0A0 - Page 653

3.Troubleshooting
27
Code
Meaning
Suggested Cause/Action
22-
04
The machine cannot store received data in
the SAF
 Update the ROM
 Replace the FCU.
22-
05
No G3 parameter confirmation answer
Defective FCU board or firmware
23-
00
Data read timeout during construction
 Restart the machine.
 Replace the FCU.
25-
00
The machine software resets itself after a
fatal transmission error occurred
 Update the ROM.
 Replace the FCU.
F0-xx
V.34 modem error
Replace the FCU.
F6-xx
SG3 modem error
 Update the SG3 modem ROM.
 Check for line noise or other line problems.
 Try communicating another V.8/V.34 fax.