Ricoh M0A0 - Page 673

4.Service Tables
47
1: Disabled
entering Energy Saver mode.
Use this setting if an external telephone has to be used when the
machine is in the Energy Saver mode.
2-
3
Not used
Do not change these settings.
4-
5
Interval for preventing the machine from
entering Energy Saver mode if there is a
pending transmission file.
If there is a file waiting for transmission, the machine does not go to
Energy Saver mode during the selected period.
After transmitting the file, if there is no file waiting for transmission,
the machine goes to the Energy Saver mode.
Bit 5
Bit 4
Setting
0
0
1 min
0
1
30 min
1
0
1 hour
1
1
24 hours
6-
7
Not used
Do not change
System Switch 16 (SP No. 1-101-023)
No
Function
Comments
0
Parallel Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages simultaneously using all available ports during
broadcasting.
NOTE: If a customer wants to keep a line available for fax reception or other
reasons, select "0" (Disable).
1
Priority setting for the
G3 line.
0: PSTN-1 > PSTN-2
or 3
1: PSTN-2 or 3 >
PSTN-1
This function allows the user to select the default G3 line type. The optional SG3
units are required to use the PSTN-2 or 3 setting.
2-
7
Not used
Do not change these settings.
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 (SP No. 1-101-026)
No
Function
Comments
0-
5
Not used
Do not change the settings.