Ricoh M0A0 - Page 676

4.Service Tables
50
2
Not used
Do not change the settings.
3
Received fax print start timing
(G3 reception)
0: After receiving each page
1: After receiving all pages
0: The machine prints each page immediately after the
machine receives it.
1: The machine prints the complete message after the machine
receives all the pages in the memory.
4-
6
Not used
Do not change the factory settings.
7
Action when a fax SC has occurred
0: Automatic reset
1: Fax unit stops
0: When the fax unit detects a fax SC code other than SC1201
and SC1207, the fax unit automatically resets itself.
1: When the fax unit detects any fax SC code, the fax unit
stops.
Reference:
For fax SC codes, see "Troubleshooting".