Ricoh M0A0 User Manual

4.Service Tables
96
Address
Function
Unit
Remarks
Bit 7: 0, Bit 6: 1, Bit 5: 0 = -30.0 dBm
Bit 7: 1, Bit 6: 0, Bit 5: 0 = -40.0 dBm
Bit 7: 1, Bit 6: 1, Bit 5: 0 = -49.0 dBm
Bits 2, 0 - See Note 2.
68055F
to
680564
Not used
-
Do not change the settings.
680565
Long distance call prefix (HIGH)
BCD
For a code of 0:
680565 – FF
680566 - FF
680566
Long distance call prefix (LOW)
BCD
680567
to
680571
Not used
-
Do not change the settings.
680572
Acceptable ringing signal frequency:
range 1, upper limit
1000/ N
(Hz)
SP2-103-003 (parameter 02).
680573
Acceptable ringing signal frequency:
range 1, lower limit
SP2-103-004 (parameter 03).
680574
Acceptable ringing signal frequency:
range 2, upper limit
SP2-103-005 (parameter 04).
680575
Acceptable ringing signal frequency:
range 2, lower limit
SP2-103-006 (parameter 05).
680576
Number of rings until a call is detected.
1
SP2-103-007 (parameter 06).
The setting must not be zero.
680577
Minimum required length of the first ring
20 ms
See Note 4.
SP2-103-008 (parameter 07).
680578
Minimum required length of the second
and subsequent rings
20 ms
SP2-103-009 (parameter 08).
680579
Ringing signal detection reset time
(LOW)
20 ms
SP2-103-010 (parameter 09).
68057A
Ringing signal detection reset time
(HIGH)
SP2-103-011 (parameter 10).
68057B
to
680580
Not used
-
Do not change the settings.
680581
Interval between dialing the last digit
and switching the Oh relay over to the
external telephone when dialing from
20 ms
Factory setting: 500 ms

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English