Rohde & Schwarz CMU 200 - Page 286

CMU Base System CMU
1100.4903.12 6.20 E-10
MMEMory:CDIRectory [<DirName>], [<msus>] Change Directory
<DirName>
Parameter description Def. value Def. unit FW vers.
"<DirectoryName>",
INTernal | EXTernal
Name of the directory to be accessed
Internal or external storage device
"\USERDA
TA\SAVE"
– V3.05
Description of command
This command has no query form. It sets the directory specified via <DirName> as default directory. If this pa-
rameter is omitted, the directory is set to the USERDATA\SAVE subdirectory of the INTernal or EXTernal root
directory, depending on the current MMEMory:MSIS [<msus>] settings.
MMEMory:DELete <FileName> [,<msus>] Delete File
Parameters
Parameter description Def. value Def. unit FW vers.
"<FileName>",
INTernal | EXTernal
Name of the file to be deleted
Storage device of the file to be deleted
–
INTernal
6
–
–
V3.05
Description of command
This command has no query form. It removes a single file from the specified mass storage device.
MMEMory:RMDir <DirName> [,<msus>] Remove Directory
Parameters
Parameter description Def. value Def. unit FW vers.
"<DirectoryName>",
INTernal | EXTernal
Name of the directory to be removed
Storage device of the directory
–
INTernal
6
–
–
V3.05
Description of command
This command has no query form. It removes a directory with all its contents and subdirectories from the speci-
fied mass storage device. The command is CMU-specific.
MMEMory:MKDir <DirName> [,<msus>] Make Directory
Parameters
Parameter description Def. value Def. unit FW vers.
"<DirectoryName>",
INTernal | EXTernal
Name of the directory to be created
Storage device of the directory
–
INTernal
6
–
–
V3.05
Description of command
This command has no query form. It creates a new subdirectory in the current directory. The command is CMU-
specific.
MMEMory:COPY Copy File
<FileSource>, <msus1>, <FileDest>, <msus2> | <FileSource>, <FileDest>
Parameters
Parameter description Def. value Def. unit FW vers.
"<FileSource>",
INTernal | EXTernal,
"<FileDest>",
INTernal | EXTernal
Name of the file to be copied
Storage device of the source file
Name of the new file
Storage device of the new file
–
INTernal
6
–
INTernal
6
–
–
–
–
V3.05
Description of command
This command has no query form. It copies the contents of an existing file or directory to a new one.