Rohde & Schwarz CMU 200 User Manual

CMU Software Update and Version Management
1100.4903.12 1.25 E-10
Write log files to disk
Write log files to disk copies all *.log files stored on the CMU hard disk to an
external storage medium (floppy or PCMCIA card). The *.log source files on
the hard disk are not deleted.
The Write log files to disk function opens a blue message box indicating the
storage capacity of the external disk needed. The *.log files can be
distributed over several disks. If no disk is available, the VersionManager
displays a warning and does not start copying.
Delete non volatile
ram
Delete non volatile ram deletes all entries stored in the non volatile ram of
the CMU. This memory contains particular settings of the last CMU session
that can be reused in the next session (e.g. the last active function group
and measurement menu, special configuration etc.).
Deleting the non volatile ram can be useful after an abnormal termination of
a CMU measurement session.
Note: The settings stored in the non volatile ram can also be written
to a configuration file and reused in later sessions; see
Chapter 3, section Saving Configurations.
Scan disk
Scan disk closes the VersionManager, executes the MS Scan Disk program
and finally returns you to the VersionManager. Refer to your Scan Disk
documentation for further information.
Note: This function is not available while a base software version
<V3.00 is active.
List all versions to
disk
List all versions to disk writes the software configurations indicated via List
software to an ASCII text file that is stored on the external disk.
Copy non volatile ram
to disk
Copy non volatile ram to disk copies the contents of the non volatile ram to
the external disk (floppy, PCMCIA).
In this way, the settings stored in the non volatile ram can be used on
another CMU.
Defragment disk
Defragment disk closes the VersionManager, executes the MS Defrag.exe
program and finally returns you to the VersionManager. Defragmenting the
hard disk is suitable to improve performance after installing and deleting
many different software versions. Refer to your Defrag.exe documentation
for further information.
Note: This function is not available while a base software version
<V3.00 is active.
Info
Info opens an output window displaying information on the current screen.
Separate Info windows are provided for the different VersionManager
dialogs.

Rohde & Schwarz CMU 200 Specifications

General

Brand	Rohde & Schwarz
Model	CMU 200
Category	Test Equipment
Language	English