Installation check list: Antenna
7-2 Chapter 7: Installation check 98-137654-A
7.
Make sure that the
requirements for mast
foundation and height,
including flatness, gusset
plates and distance from
welding seams are met.
See ADU mast design:
Foundation and height on
page 3-7.
8.
Make sure that the distances to
radar, Inmarsat systems, GPS
receivers and other
transmitters are as required.
See Interference on page 3-
12.
9.
Make sure that the drain tube
is open and risk for water
intrusion is at a minimum.
See Other precautions on
page 3-16.
10.
Check that the ADU is
grounded correctly, using the
mounting bolts.
See Grounding the ADU on
page 3-22
and
Grounding and RF
protection on page B-1.
Step Task Further information Done
Table 7-1: Installation check list: Antenna (Continued)
SAILOR100TM.book Page 2 Tuesday, January 29, 2013 2:44 PM
To Next Page
Loading...
