Sailor 100 - Adjusting Brightness of the Display

Keypad and menus of the ACU
98-137654-A Chapter 6: Configuration 6-49
6666
Configuration
Example: EVENT 1/4*: This is the first event out of a list of 4 and
there has been a change in the list. EVENT 1/4 will
always be shown, the * indicates that there has been a
change.
6.5.4 Adjusting brightness of the display
To adjust the brightness do the following:
1. Press and hold OK for a short moment until BRIGHTNESS XXX%
is displayed (XXX is the current brightness value).
2. Hold OK pressed + press for lighter or for darker display.
3. Release OK to leave the brightness menu.
EVENT
menu
Description
<EVENT> In this menu all active events are listed. Use
and to
go through the active events.
Events can be of the type WARNING or ERROR.
If a new event occurs or there is a change in the event list
while you are in the EVENTS menu, a * is shown in the upper
left corner of the display, next to the menu name. Press OK to
update the EVENTS list, the * will be removed.
A > means the event text is longer than the display. Press to >
to see the remaining text.
Table 6-15: EVENTS menu of the ACU
SAILOR100TM.book Page 49 Tuesday, January 29, 2013 2:44 PM