Sailor 100 - Figure 8-57: Polarisation Motor - Slide off the Belt; Figure 8-58: Polarisation Motor, Removing 4 X4 allen Screws (Thread Size M5); Inserting a New Polarisation Motor

Removal and replacement of ADU modules
98-137654-A Chapter 8: Service & maintenance 8-49
8888
Service & maintenance
7. Remove the 4x4 mm Allen screws (thread size M5) that hold the
motor.
8. Remove the Polarisation Motor.
8.5.6.10 Inserting a new Polarisation Motor
To insert a new Polarisation Motor follow the instructions above in
reverse order.
Figure 8-57: Polarisation Motor — slide off the belt
Figure 8-58: Polarisation Motor, removing 4x4 Allen screws (thread size M5)
SAILOR100TM.book Page 49 Tuesday, January 29, 2013 2:44 PM