Sailor 100 - List of ACU Events

List of ACU events
98-137654-A Appendix C: System messages C-7
CCCC
System messages
C.3 List of ACU events
Error
code (ID)
ACU
PCB
Severity Description Explanation
08060-0 ADM WARNING ADU modem ACU/ADU communication error detected (framing
and parity). If the situation is persistent, check if
cable specifications comply (length and
attenuation).
08063-0 ADM ERROR ADU connection The ACU has lost connection with the antenna.
08065-0 ADM WARNING GNSS data Missing GPS data (fix).
08066-0 ADM WARNING Heading data Missing heading information. Check cable and
heading provider device.
08067-0 ADM ERROR PCB temperature ADM temperature too high. The ACU is not
equipped with a fan, so make sure there is
compliance with the environmental
specifications.
08068-0 ADM ERROR PSM power The PSM fails to provide the requested supply
voltage.
08069-0 ADM WARNING Blocking Zone The antenna has entered a blocking zone.
0806D-0 ADM ERROR ADU power The ADU supply voltage is outside the allowed
limits. This could happen if the PSM fails to
provide the requested supply voltage or if the
voltage difference across the hotswap is
unacceptable high.
08070-0 ADM ERROR Satellite profile There is an error in the active satellite profile.
Validate that a satellite has been selected in the
satellite profile and that the other satellite profile
settings are configured properly. If re-applying
the satellite profile settings does not help,
contact your service partner.
08071-0 ADM ERROR Satellite data There is an error in the satellite database. The
data describing the satellite selected in the active
satellite profile is corrupt. Edit the respective
satellite entry and correct its data. Please report
this incident to your service partner.
Table C-2: ACU event messages
SAILOR100TM.book Page 7 Tuesday, January 29, 2013 2:44 PM