Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 Parameters 3-27
LR PAN for Stereo Channels The functions PAN ON/OFF and PAN have been extended to enable
working with either standard (L/R) stereo or with MS (mono/side) signals.
In addition, features are available to increase the stereo image manipula-
tion possibilities, such as
• Input Direction or
• Input Balance,
• Stereo Width (pan width), and
• Stereo Direction.
Virtual Surround Panning (VSP) Various surround panning algorithms can be configured for mono input,
group, multi-track input, and multi-track monitor channels using the Ses-
sion Configuration Tool.
Basically, two different surround panning algorithms are available: Multi-
format pan, and VSP (Virtual Surround Panning), see table; some more in-
formation on these algorithms is given in the “Parameters” sections below.
Algorithm:
Format
2-CH
to
7.1-CH
LCR,
F/B,
Ls/Rs Pan
Divergence
Seamless Center
Channel Usage
Pan Mode
VSP Controls:
Ambience,
Distance,
Absorption,
Room Size
Multi-Format Pan
X X X X Amplitude –
VSP Pan
X X X X
Amplitude, HRTF,
Sphere, ORTF, AB
X
Depending upon the currently loaded session configuration, one or both
algorithms above may be present in the console at a time.
A
B
Left Right
Listening Position
Direction
Stereo
Width
+30°–30°
To Next Page
Loading...
