Vista Digital Mixing System
Date printed: 05.04.2005 SW V3.5 Vista 8 Differences 8-7
8.2.6.2 “Small” Switching to the Redundant Control System (Health Check)
It is possible to switch to the redundant control system without activating
the emergency procedure. This may be useful for e.g. a quick health check
or for maintenance purposes. In this case, only the keyboard, trackball and
the graphic controller screen is switched over, while the console itself con-
tinues to run using the main control system. Such a security check may be
performed at any time during console operation. Switchover is done by
pressing-and-releasing the × (shift) key of the keyboard, followed by
pressing the “-” key.
Note: This combination may vary according to the serial number of the console.
Please refer to the documentation delivered with your console in case the
key combination described shouldn’t work.
To Next Page
Loading...
