STUDER 07. Mar. 2005 Release Notes Vista 3.5
16/21
13. Minor improvements and fixed bugs
Description Comment
Some meter peak values get lost fixed
Monitoring settings were not stored with title or their application fails
when changing configurations.
fixed
"Clear All" action lets control over microphone preamplifiers disappear fixed
Clipboard library: Sometimes pan values are not correctly indicated fixed
Dynamic Automation: Scrolling clears all "HOLD" states of channels only the scrolled ones
are cleared, other
ones stay in "HOLD"
mode.
Display of current bays on Strip Setup window sometimes wrong fixed
Configuration Editor Software: After removing an insert function from a
CGM, it can't be added anymore
fixed
Easy to create offsets when working with Control Group Masters fixed
Loading a strip setup from another title with another session configuration
doesn't work correctly
fixed. Strip Setup will
show now all common
channel types.
Section change during setup of CGM groups will result in dark LINK/SEL keys
instead of half lit
fixed
n-x setup: When using a gang, it is possible to add the n-x owner channel to
its own n-x bus
fixed
Adjusting the momentary activation time doesn’t impact keys in monitoring
section
fixed
Snapshot recall doesn't restore position of VCA member channels correctly fixed
Channel isolation doesn't include insert points and misses some direct out
settings
fixed
Channel delays can't be controlled by CGM fixed
Improvement: When trying to open a title which doesn't belong to the
currently loaded configuration, the question about importing it into the
currently loaded configuration defaults to YES. Dangerous!
Now default NO
Audible clicks when adjusting D21m mic gains fixed
Channel function keys (above Vistonics screen) on fader bays sometimes
stay dark upon first start of console
fixed
UNDO of CLEAR fader (touch) doesn't work fixed
Unreliable restore of snapshot filter state upon console application start fixed
Sometimes moving a CGM master doesn't move its members fixed
General Patch window: Label edit dialog box jumps to "target label" upon
touching the generic display area
shows now always
source labels
Deleted snapshot after error "Failed to update Snapshot" fixed
Pan function on SOLO bus doesn’t work correctly Fixed. Recompile
Configurations!
Vista 8 specific:
Vista 8 control bay: No momentary activation of PFL/SOLO buttons. fixed
Vista 8 with redundant control system: Not all settings were copied to
redundant system
fixed
Vista 8 Improvement: When hitting CONTRIB on a auxiliary master channel,
the contribution view is now using the right colour coding.
Vista 8: When hitting CONTRIB key on the control bay, the modifier state
MUTE/TALK should be reset
fixed
Vista 8: Copy/Paste of strip setup between fader bays and control bay not
possible
fixed
Vista 8 control bay: changing fader page should re-allign to center position fixed
Vista 8 control bay: L2 button on channel 10 doesn't work fixed
Vista 8 Control Bay: When assigning input channels onto the Vistonics
screen using USER views, these channels don't show PFL/SOLO functionality
fixed
Vista 8 dynamic automation: When enabling record on MUTE keys they are
not going half lit
fixed
To Next Page
Loading...
