Studer Vista - Rename;Delete a Clipboard Library File; Clear the Display; Update a Clipboard File

Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 Desk Operation 2-37
5 Click on the 2 (Copy/Paste) button of the desired function in order to
activate copying. The button will light, and all possible destination keys
on the console surface will be half-lit. Shortcut: A double-click on the
clipboard name in the list will activate copying of all contained audio
values within that particular file directly.
6 Paste the value into one or more channels of the console, using the stan-
dard functionality. If the clipboard contained multiple audio settings,
such as EQ and Dynamics, they may be pasted together by pressing the
2 A (Copy/Paste All) key of the destination channel.
2.5.4 Rename/Delete a Clipboard Library File
1 Open the Clipboard Library window (see above).
2 Select the file you want to change or delete by clicking on it. Click on
the “Rename” or “Delete” button of the Clipboard Library window in
order to execute the desired action.
3 Close the Clipboard Library window (see above).
2.5.5 Clear the Display
By clicking on the “Clear” button, the previewed settings are cleared, and
no graphical indication is shown on the right-hand side of the window.
2.5.6 Update a Clipboard File
To combine, for instance, the current dynamics settings of a channel with
the EQ settings that are already in the library, and to store them as one new
set into the library, proceed as follows:
1 Open the Clipboard Library window (see above).
2 Select the desired, already stored EQ setting by clicking on it once. The
EQ settings will be displayed graphically on the right-hand side of the
window.
3 Press the 2 (Copy/Paste) key in the dynamics section of the source
channel on the console.
4 Click on the half-lit 2 (Copy/Paste) button in the dynamics section of
the window.
5 Both EQ and dynamics values will now be displayed on the right-hand
side of the window.
6 The Save dialog opens. Once saved, the new, combined set will now be
displayed within the “Combined” tab.
7 Close the Clipboard Library window (see above).