Studer Vista - Naming Auxiliary Buses

Vista Digital Mixing System
Date printed: 05.04.2005 SW V3.5 Vista 8 Differences 8-35
8.6.7 Naming Auxiliary Buses
A name can be given to the auxiliary master channel, which is automati-
cally propagated backwards to all displays of the input channel. Renaming
the auxiliary master user label is done within the channel patch window.
Double-click on the Usr (label) area and enter a name, e.g. the name of the
device attached to the output of this auxiliary master channel. The given
name will then automatically show up on the input channels rather than the
auxiliary number.