Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 Parameters 3-17
3.3.11 Panning Parameters
Press GLOBAL VIEW: PAN.
This view enables the user to control the most important parameters of the
panning section. Representation is different depending on channel type
(mono or stereo), and on the selected panning format. The complete pa-
rameter set is available on the channel-related pan view, refer to chapter
3.4.3. In that chapter you will also find the parameter details.
Please note: The complete panning section can be activated simultaneously
with the PAN hardware key below the channel meters – in addition to the
individual on/off keys described below.
Mono Channel: Stereo Channel: Multi-Format Pan:
Please note that the DIR WIDTH display only appears if this feature has
been configured for the corresponding channel.
To Next Page
Loading...
