Studer Vista - Container.ini

Vista Digital Mixing System
14 Software V4.1 SW V4.1 Date printed: 20.08.09
A.5.4 Container.ini
The container.ini file for the Vista system is found in C:\D950System\. This
file contains some important entries making the I/O Sharing work. Here a
list of these entries:
##########################################################################
#
# container.ini: Necessary for initialization of each container (.exe)
#
# Digital Mixing Console: VISTA
# Studer Professional Audio GmbH, Regensdorf, Switzerland
#
# Last modification : Sep, 1st 2006
# Compatible with OATreeLib : V2.1
# Author : SIA
#
# Rules:
# =====
# - always leave one blank before and after the ‘=’ (e.g. systemid=1 NO!)
# - never change the left expression
# - the right expression of systemid, containerid, systemname
# and containername MUST be defined
#
##########################################################################
# The systemid identifies the mixing console system to which this container
# belongs to. The systemid is a unique number within a network.
# The serial number must be in the range 1...255
systemid = 35  this needs to be a unique number
# The systemname identifies the mixing console system in a readable way
# and must be unique within a company resp. network. It is recommended
# not to use more than 8 characters due to visualization aspects.
# «Undefined» is not allowed!
systemname = «Vista5»  the name of the system
# The containerid identifies this container
# and must be unique within the mixing console system
# This id is fixed to ‹10› (CORE) for all VISTA desks
containerid = 10
 ‚10’ is always standing when the container.ini is belonging to a Vista desk
# The containername identifies this container in a readable way
# and must be unique within the mixing console system. It is recommended
# not to use more than 8 characters due to visualization aspects.
# «Undefined» is not allowed!
containername = «Desk»  the name of the container