Vista Digital Mixing System
8-12 Vista 8 Differences
SW V3.5 Date printed: 05.04.2005
8.4.1.1 “Grand Master” Faders
The setup of the grand master faders is done within the same window.
Unless the corresponding option is selected, faders defined as grand mas-
ters never change when selecting different fader pages (these faders are
shown in the top right corner of the screenshot on page 8-10).
8.4.1.2 Touch Screen
On the touch screen area of the Vistonics
®
screen, the ten faders are cor-
rectly labeled and color-coded. If the channels currently shown contain EQ
or dynamics functionality, the corresponding settings are graphically dis-
played on the touch screen. It is possible to touch those curves in order to
open up their parameter control views on the Vistonics
®
rotaries, as known
from the fader bays.
To Next Page
Loading...
