Vista Digital Mixing System
Date printed: 20.08.09 SW V4.1 Software V4.1 49
H CHANGES
H.1 Configuration Change
When a configuration is changed – either by changing a title or manually –
since SW V4.1 the Vista application automatically gets restarted. This is
required in order to have the configured I/O system initialized properly, so
that it is available for other systems within the RELINK network immedi-
ately.
H.2 Modified Vistonics™ Mic Ctrl View
Due to the microphone take-over mechanism for the RELINK functional-
ity, the layout of the Vistonics™ mic control view has changed.
For details please refer to chapter A.3.
H.3 Improved AUX Send Level Resolution
Several users reported that the AUX send level resolution is too coarse; the
resolution of the level-type Vistonics™ elements has been increased
around the 0 dB region.
Note: No more excuses now for bad monitor mixes! ☺
H.4 D21m Dialog
A new version of the notorious dialog window reporting a change in the
I/O setup has been introduced with SW 4.1:
Earlier Version:
To Next Page
Loading...
