Studer Vista - Technical Details; Configtool for Dnet Applications; Setting up the Vista for I;O Sharing

Vista Digital Mixing System
Date printed: 20.08.09 SW V4.1 Software V4.1 9
A.5 Technical Details
A.5.1 Setting up the Vista for I/O Sharing
A.5.1.1 ConfigTool for DNet Applications
For configuring the tie lines necessary for I/O Sharing on the Vista system,
we use the ConfigTool for DNet Applications known from the OnAir
product range. This program now needs to be installed on the Vista’s con-
trol computer (C:\Release ConfigTool\ConfigTool.exe). In the same folder
there needs to be a file named container.ini with setup information for this
DNet ConfigTool. Here is an example of the container.ini file for the Con-
figTool:
##########################################################################
#
# container.ini: Necessary for initialization of each container (.exe)
#
# Digital Mixing Console: VISTA
# Studer Professional Audio GmbH, Regensdorf, Switzerland
#
# Last modification : Sep, 1st 2006
# Compatible with OATreeLib : V2.1
# Author : SIA
#
# Rules:
# ======
# - always leave one blank before and after the ‹=› (e.g. systemid=1 NO!)
# - never change the left expression
# - the right expression of systemid, containerid, systemname
# and containername MUST be defined
#
##########################################################################
# The systemid identifies the mixing console system to which this container
# belongs to. The systemid is a unique number within a network.
# The serial number must be in the range 1...255
systemid = 36  this needs to be a unique number
# The systemname identifies the mixing console system in a readable way
# and must be unique within a company resp. network. It is recommended
# not to use more than 8 characters due to visualization aspects.
# «Undefined» is not allowed!
systemname = «ConfigTool»
 the name of the system