Vista Digital Mixing System
8-24 Vista 8 Differences
SW V3.5 Date printed: 05.04.2005
8.6.3 Cue List
When using software V3.5 or newer, an extensive Cue List functionality is
available. The Cue List allows sorting snapshots as well as attaching MIDI
and HiQNet commands to each of them. Each title can contain one Cue
List. The Cue List can be controlled from external controllers using MIDI.
It is possible to use standard “MIDI show control” commands as well as
recalling certain cues with a user-defined MIDI command (note and pro-
gram change). The Cue List is only available in “static” mode, hence not
when dynamic automation is active. Opening the cue list is done either by
clicking on the Cue Icon (see left) in the GC screen’s toolbar, or by using
the LIST key on the control bay.
8.6.3.1 Activating Theatre Cue List Functionality
In order to activate the “theatre cue list” functionality, enter the “Option:
“Static Automation” menu. (Explanation of further options see chapter be-
low)
8.6.3.2 Hardware Keys
The following keys are located on the control bay:
They can be used to control various functions of the cue list and allow cer-
tain functions to be switched using a hardware key, while it remains possi-
ble to use the trackball and operate these functions on the graphic control-
ler screen:
• Switching on/off the cross-fade function between cues
• Activate or inactivate the cue preview mode
• Go to the next or previous cue.
To Next Page
Loading...
