Vista Digital Mixing System
Date printed: 20.08.09 SW V4.1 Software V4.1 23
A.7 Messages from Other Systems
When there are patch connections to other systems in the RELINK network
– e.g. when using a mic input of another Vista or OnAir console – or when
outputs are patched to a Route 6000 or to an other console, the local Vista
will receive status messages from these systems.
Vista systems receive and display the following message types from OnAir
and Route 6000 systems:
• Power loss on Core and D21m frames
• D21m hardware change
• System shut down
Vista systems send the following message type:
• System shut down
These messages are all displayed in the same type of window that also
shows mic control messages:
As long as no sources or targets of a remote system are used locally, no
status messages of these systems are shown on the local Vista.
A.8 Labels from Other Systems
When patching remote inputs to a Vista system, the ‘user label’ of this
input on the remote system is propagated to the Vista’s input channel label
display.
A.9 Locked Patch Points
Locked patch points are treated in the same way as local sources.
To Next Page
Loading...
