Vista Digital Mixing System
Date printed: 05.04.2005 SW V3.5 Vista 8 Differences 8-13
8.4.1.3 Contribution Access
Very often it is useful to operate the console in “reverse” way, coming
from an output fader and operate the various input channels contributing to
this output. By pressing the CONTRIB key on top of a fader the Vistonics
®
rotaries will show all channel faders currently contributing to this master
signal. In case of a matrix or AUX master output, the view shows all chan-
nels contributing to this output, hence input, subgroup or master channels.
“Contribution” can be operated in two ways, depending on the state of the
“Reduced View” key on the left-hand side:
“Reduced View ON”: When pressing CONTRIB only the channels currently assigned to the corre-
sponding master bus are displayed.
To Next Page
Loading...
