Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 Desk Operation 2-23
[138] CR INJECT
If active: PFL/SOLO signals will be audible in the control room speakers
as soon as any PLF/SOLO function is activated.
[139] SIP SAFE
Pressing this key enters setup mode for editing the channels that should be
safe from muting when activating SOLO IN PLACE on any other channel;
by default, all master channels are safe from muting when SOLO IN PLACE
is active. It may be desirable to protect effect returns from muting by
adding them to the group of safe channels. When in SIP SAFE setup mode,
it is possible to select or de-select individual channels on the desk by
pressing their LINK / SEL key. Pressing SIP SAFE again will cancel edit
mode and activate the selected SIP protection. The information on which
channels should be protected is stored in each title, and therefore may vary
from title to title.
Note: As a standard, the MULTISEL key is active when entering SIP SAFE setup
mode. Thus it is possible to select or de-select any channels to be safe
from muting. However, for clearing all currently selected and safe chan-
nels (including master channels), the MULTISEL key may be de-activated.
When pressing any LINK / SEL key of a channel, all others will be de-
selected.
[140] LOCK
Locks the control room level and prohibits it from being changed by acci-
dent.
[141]
¹ NEAR FIELD
¹ ALT
¹ MAIN
Selection of three speaker sets: MAIN and ALT can be multi-channel sur-
round systems, NEAR FIELD is a two-channel stereo system. A separate
level control is available for each set of speakers, but can be deactivated at
installation time. This may be done in the monitoring.ini file by experts
only.
[142]
¹ MUTE
¹ DIM
¹ dB SPL
Muting and dimming of the control room speakers, and setting their level.
DIM level may be adjusted in the monitoring.ini file (by experts only).
Note: The GC allows level calibration of the different speaker sets as well as
trimming the individual speakers.
Vista 6 has two additional keys located above the CR INJECT key [138]:
ON AIR prohibits activation of potentially dangerous functions, such as
Solo in Place or Talk to Masters.
PFL BC activates a mode where PFL/SOLO on a channel is automatically
canceled whenever the channel fader is open.
To Next Page
Loading...
