Vista Digital Mixing System
24 Software V4.0 SW V4.0 Date printed: 17.06.08
CENTER On/Off [10] On/off selector for center channel use.
CENTER [11] Center channel percentage control; 0% = no center channel use (phantom
center), 100% = center channel fully active.
FRONT WIDTH On/Off [12] Switches the FRONT WIDTH function on/off.
FRONT WIDTH [13] The FRONT WIDTH parameter is used to control the width of the front
signal. It is only functional if there is a difference between the left and right
input channels. FRONT WIDTH operates over a range from 0% (mono) to
200% (“super stereo”).
F/R DEPTH On/Off [14] Switches the F/R DEPTH function on/off.
F/R DEPTH [15] The F/R DEPTH parameter is used to control the depth of the surround
space. It is only functional if there is a difference between the front and the
rear input channels. F/R DEPTH operates over a range from 0% (zero
depth) to 200% (“super depth”).
REAR WIDTH On/Off [16] Switches the REAR WIDTH function on/off.
REAR WIDTH [17] The REAR WIDTH parameter is used to control the width of the rear sig-
nal. It is only functional if there is a difference between the left and right
input channels. REAR WIDTH operates over a range from 0% (mono) to
200% (“super stereo”).
To Next Page
Loading...
