Vista Digital Mixing System
Date printed: 05.08.03 SW V3.3 Parameters 3-25
SC HI CUT/LO CUT [63] Both side-chain filters feature cut-off frequencies continuously adjustable
between 20 Hz and 20 kHz.
MKUP auto on/off [64] Auto Make-up Gain function on/off.
MKUP GAIN [65] For manual gain compensation; gain can be set in 1 dB steps from 0
through +24 dB.
LOOKFWD On/Off [66] The Look Forward Delay function allows the insertion of an audio delay
after the dynamics level detector, allowing to work with higher attack
times without any overshooting of levels.
LOOKFWD [67] The Look Forward Delay can be set in 11 steps within a range from 0 to
25 ms (0 ms, 0.2 ms, 0.3 ms, 0.5 ms, 1 ms, 2 ms, 3 ms, 5 ms, 10 ms, 20 ms,
and 25 ms).
By activating the look forward feature, a real delay is inserted into the
audio path. In order to avoid artifacts with other console channels, it is
recommended to insert a corresponding delay into the other channels as
well.
Please note that there are COMP/LIMIT and EXP/GATE hardware keys below
the channel meters for activating or deactivating the compressor/limiter
and expander/gate parts of the dynamics section, in addition to the individ-
ual On/Off keys for each dynamics function.
To Next Page
Loading...
