Vanderbilt SPC53 Series User Manual

14
Starting the system
Configuring wireless fob devices
106
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Receiver area on the keypad
To program a portable ACE on the keypad:
1. Enter the Engineer Programming PIN. (Default PIN is 1111. See Engineer PINs
[➙ 102])
2. Scroll to USERS.
3. Press SELECT.
4. Select EDIT and select USER1 from the list.
5. Scroll to PACE and press SELECT.
6. Toggle for ENABLE and DISABLE of the PACE functionality.
 The keypad flashes PRESENT PACE on the top line display.
7. Position the PACE fob within 1 cm of the receiver area on the keypad.
 The keypad indicates that the device has been registered by displaying PACE
CONFIGURED.
To disable a portable ACE on the system:
1. Enter the Engineer Programming PIN. (Default PIN is 1111. See Engineering
PINs [➙ 102])
2. Scroll to USERS.
3. Press SELECT.
4. Select EDIT and select USER1 from the list.
5. Scroll to PACE and press SELECT.
6. Toggle to DISABLED.
 The keypad indicates UPDATED.
14.6 Configuring wireless fob devices
If an 868 MHz wireless receiver module is installed on the keypad or controller, a
wireless fob device can be programmed via the keypad.
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
2
abc
3
def
#
0
1
ok

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English