Engineer programming via the browser
Installation & Configuration Manual
17.7 Logs
17.7.1 System Log
This log displays all the system events of the SPC system.
1. Select Log > System Log > System Log.
2. Create a text file of the log by clicking Text File.
3. The logging of individual zone state changes is enabled by setting the log
attribute for that zone in the Zone Attributes configuration page.
In order to avoid multiple events from the same source filling the log, the SPC
system, in accordance with standards, permits the logging of only 3 activations of
the same zone in one set period.
17.7.2 Access Log
The log provides all the access events of the SPC system.
Select Log > Access log.
The following window will be displayed:
To Next Page
Loading...
Need help?
General
