Engineer programming via the browser
Installation & Configuration Manual
Mode71: 7-digit PIN enables 1000,000 global users
Mode81: 8-digit PIN enables 10,000,000 global users
When you set an SPC Manager mode, additional zeros are added to the front of
existing 4 or 5 digits user PINs which modify the PIN for global use. For example, if
Mode71: 7-PIN Digit is selected, 3 zeros are added to existing 4 digit PINs - 2222
will become 0002222.
To set the SPC Manager Mode:
1. Select Communications > PC Tools > SPC Manager.
2. Select the SPC Manager global user mode from the drop down list.
3. Click on the Save button.
The mode cannot be saved if a conflict exists between a local existing user
PIN and another user PIN on the global system. An ‘Invalid PIN’ error is
displayed.
4. Click on the appropriate button to delete the PIN and save the new mode or
change the PIN to the randomly generated new PIN displayed and then save
the new mode.
SPC Manager modes cannot be changed if global users exist on the system.
17.10.4.3 Remote Maintenance
For further information please refer to the Remote Maintenance Configuration
Manual.
Remote Maintenance Report
A Remote Maintenance Report can be obtained directly by SPC Pro from the
panel.
SPC Pro must be online with the panel.
Remote Maintenance must be enabled.
1. Click on the Advanced menu .
2. Select the Get Service Report from Panel menu option.
For further details on Remote Maintenance, refer to the SPC Remote Maintenance
manual.
17.11 File Operations
To perform operations on the panel files and configuration:
To Next Page
Loading...
Need help?
General
