Vanderbilt SPC53 Series User Manual

Technical Data
4
SPC6000
35
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Dimensions (W x H x D)
 SPC5320: 264 x 357 x 81 mm
 SPC5330: 326 x 415 x 114 mm
 SPC5350: 498 x 664 x 157 mm
Housing
 SPC5320: Small metal housing, (1.2 mm mild steel)
 SPC5330: Hinged metal housing, (1.2 mm mild steel)
 SPC5350: Metal housing (1.5 mm mild steel)
Housing can contain up to
 SPC5320: 1 additional expander,
 SPC5330: 4 additional expanders (size 150 mm x 82
mm)
 SPC5350: 4 additional expanders (150 x 82 mm)
IP / IK Rating
30 / 06
ATS
5
ATP
15
Event Profiles
10
Event Exceptions
50
Command Profiles
8
1) Max. 400 m between devices / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP
cat5 (solid core) or Belden 9829.
2) More I/O expanders can be addressed instead of a keypad or door expander,
but number of programmable inputs / outputs cannot exceed specified system
limits.
4.3 SPC6000
Programmable areas
60
Max. number of user PINs
2500
Remote controls
Up to 100
Wireless Panic Alarm
Up to 128
Event memory
10,000 intrusion events, 10,000 access events
Number of on-board zones
 SPC6320\6330 — 8
 SPC6350 — 16
Max. number of hardwired
zones
512
Max. number of wireless
zones
120 (take away wired zones)
Max. number of Intrunet
wireless detectors per
wireless receiver
(recommended)
20
EOL resistor
Dual 4k7 (default), other resistor combinations configurable
Relay Outputs
 SPC6320\6330 — 1 strobe (30 VDC/1A resistive
switching current)
 SPC6350 — 4 (single-pole changeover, 30VDC/
maximum 1A resistive switching current)

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English