Vanderbilt SPC53 Series User Manual

Engineer programming via the browser
17
Users
183
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
17.8 Users
The following table shows the maximum number of users, user profiles and user
devices for the panel:
Maximum No.
SPC4xxx
SPC5xxx
SPC6xxx
Users
100
500
2500
User Profiles
100
100
100
User Profiles per User
5
5
5
PACE Devices
32
250
250
SMS IDs
32
50
100
Web Passwords
32
50
100
RF Fobs
32
50
100
MDT Devices
32
32
32
WARNING
If upgrading from a firmware version prior to version 3.3, please note the
following:
- The Engineer web password, if configured, is deleted and must be reentered
after upgrade.
- All existing users will be assigned to new user profiles corresponding to their
previous user access levels. If max. number of user profiles is exceeded, no
profile is assigned (see User Profiles [➙ 186]). Please review all user
configuration after a firmware upgrade.
- The default Engineer ID is changed from 513 to 9999.
17.8.1 Adding / Editing a User
1. Select Users > Users > Add User.
 A list of configured users is displayed.
2. Click on the Add button or click on the Edit button of the required user.
 The following screen is displayed.

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English