Engineer programming via the browser
Installation & Configuration Manual
- Keypads (for programming keypads see page [➙ 209]).
- Door controllers (for programming door controllers see page [➙ 214]).
3. Click any of the keypad/expander/door controller identifying parameters (ID,
description, type, serial number) to displayed further status details.
17.6.2.1 Expander Status
1. Select Status > Hardware > X-Bus Status.
2. Select the Expanders tab.
A list of detected expanders and any associated PSUs is displayed.
This ID number is a unique identifier for the expander.
Text description of the expander. This text will also appear on the browser and
keypad.
The type of expander detected (I/O, PSU, keypad etc.).
The serial number of the expander.
The firmware version of the expander.
The status of the expander (online or offline).
The status of the expander (OK, Fault, OP Tamper).
The type of PSU that is fitted to the expander, if applicable. Click on the PSU to
view the PSU status.
Performable actions
Click the button to update the status of the X-BUS.
To view more status information:
Click on any of the expander’s identifying parameters (ID, description, type,
serial number) to display further status details.
To Next Page
Loading...
Need help?
General
