Vanderbilt SPC53 Series User Manual

Wiring the system
10
Wiring the zone inputs
83
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Standard wiring
NO
Normally open terminal
COM
Common terminal connection
NC
Normally closed terminal
10.5 Wiring the zone inputs
The SPC controller has 8 on-board zone inputs. By default these inputs are
monitored using end of line supervision. The installer can choose from any of the
following configurations when wiring the inputs:
 No End of Line (NEOL)
 Single End of Line (SEOL)
 Dual End of Line (DEOL)
 Anti-masking PIR

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English