Vanderbilt SPC53 Series User Manual

23
Appendix
FlexC Commands
360
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
part of one or more ATPs.
FlexC also uses the following acronyms.
Acronym
Description
ASP
Analogue Security Protocols
The analogue security protocols traditionally
used for alarm transmission over the
telephone network e.g. SIA, Contact ID.
23.23 FlexC Commands
The following table lists the commands that you can enable for a command profile.
The command profile you assign to an ATS defines how you can control a panel
from SPC Com XT.
Command Filter
Commands
System Commands
Get Panel Summary
Set the System Time and Date
Grant Engineer Access
Grant Manufacturing Access
Intruder Commands
Get the Area Status
Get the Change Mode Status of an Area
Change the mode (Set/Unset) of an Area
Get Status of Panel Alerts
Perform actions on Alerts
Silence Bells
Get Zone Status
Control a Zone
Get the System Log
Get the Log for a Zone
Get the Wireless Log
Output Commands
Get Mapping Gate Status
Control Mapping Gates
User Commands
Verify a User on the Panel
Get a User Configuration
Add a User
Edit a User
Delete a User
Get a User Profile Configuration
Add a User Profile
Edit a User Profile
Delete a User Profile
Change a User's own PIN
Calendar Commands
Read Calendar Configuration
Add a Calendar
Edit a Calendar
Edit a Calendar Week

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English