Installation & Configuration Manual
2 Security
2.1 Target group
The instructions in this documentation are directed at the following target group:
Condition of the
equipment
Technical training for
building or electrical
installations.
Assembles and
installs the hardware
components on site.
Individual
components that
need to be
assembled and
installed.
Operational startup
personnel
Has appropriate
technical training with
regard to the tasks
and the products,
devices or systems
to be put in service.
Puts the device or
system which is
readily assembled
and installed on site
into service.
New, readily
assembled and
installed device or
modified device.
2.2 General safety instructions
Before starting to install and work with this device, please read the Safety
Instructions. This device shall only be connected to power supplies compliant to
EN60950-1, chapter 2.5 ("limited power source").
2.2.1 General information
Keep this document for later reference.
Always pass this document on together with the product.
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
Liability claim
Do not connect the device to the 230 V supply network if it is damaged or any
parts are missing.
Do not make any changes or modifications to the device unless they are
expressly mentioned in this manual and have been approved by the
manufacturer.
Use only spare parts and accessories that have been approved by the
manufacturer.
2.2.2 Transport
Unit damage during transport
Keep the packaging material for future transportation.
Do not expose the device to mechanical vibrations or shocks.
To Next Page
Loading...
Need help?
General
