Vanderbilt SPC53 Series User Manual

Directives and standards
3
EU directives
15
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
3 Directives and standards
3.1 EU directives
This product complies with the requirements of the European Directives
2004/108/EC “Directive of Electromagnetic Compatibility”, 2006/95/EC “Low
Voltage Directive”, and1999/5/EC on Radio and Telecommunications Terminal
Equipment (R&TTE). The EU declaration of conformity is available to the
responsible agencies at http://pcd.vanderbiltindustries.com/doc/SPC
European Directive 2004/108/EC „Electromagnetic Compatibility”
Compliance with the European Directive 2004/108/EC has been proven by testing
according to the following standards:
emc emission
EN 55022 Class B
emc immunity
EN 50130-4
European Directive 2006/95/EC „Low-Voltage Directive”
Compliance with the European Directive 2006/95/EC has been proven by testing
according to the following standard:
Safety
EN 60950-1
3.1.1 Overview of Conformity to EN50131 Standard
This section gives an overview of the SPC compliance to the EN50131 standard.
Address of Certifying Body
VDS (VDS A / C / EN / SES Approval)
AG Köln HRB 28788
Sitz der Gesellschaft:
Amsterdamer Str. 174, 50735 Köln
Geschäftsführer:
Robert Reinermann
JörgWilms-Vahrenhorst (Stv.)
SPC products listed have been tested according to EN50131-3:2009 and all
relevant RTC specifications.
Product Type
Standard
 SPC6350.320
 SPC6330.320
 SPC5350.320
 SPC5330.320
 SPCP355.300
 SPCP333.300
 SPCE652.100
 SPCK420.100
 SPCK421.100
 SPCE452.100
 SPCE110.100
 SPCE120.100
 SPCA210.100
 SPCK620.100
 SPCK623.100
 SPCN110.000
 SPCN310.000
EN50131 Grade 3

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English