Installation & Configuration Manual
SPC Installation & Configuration Manual
Other output configurations to interface with
I&HAS components (see 8.2);
Zone types [➙ 347]
Test [➙ 145]
Keypad user interface [➙ 90]
Criteria for automatic removal of “soak test”
attribute (see 8.3.9);
Number of events resulting in automatic
inhibit
Automatic Inhibits [➙ 345]
If ACE is Type A or Type B (see 8.7) and
whether portable or moveable (see 11.14);
All devices are hardwired and powered by
system PSUs. Refer to relevant technical
data on PSUs.
Component data for non-volatile memory
components (see Table 30, step 6);
See user documentation for SPCK420/421
and SPCK620/623 keypads.
Life of memory support battery (see 8.10.1);
N/A. Stored in non-volatile memory.
Optional functions provided (see 4.1);
Engineer programming via the keypad
Engineer programming via the browser
[➙ 159]
Additional functions provided (see 4.2,
8.1.8);
Policies – System options [➙ 222]
Access levels required to access such
additional functions provided;
User configuration (keypad) [➙ 151]
User configuration (browser) [➙ 183]
Details of any programmable facility that
would render an I&HAS non-compliant with
EN 50131-1:2006, 8.3.13 or compliant at a
lower security grade, with instruction on
consequent removal of compliance labeling
(see 4.2 and 8.3.10).
Policies – System options [➙ 222]
EN50131 Compliance [➙ 19]
SPC products listed have been tested according to EN50131-6, and all relevant
RTC specifications.
SPC6330.320
SPC5350.320
SPC5330.320
SPCP355.300
SPCP333.300
SPCP355.300
SPCE652.100
SPCK420.100
SPCK421.100
SPCE452.100
SPCE110.100
SPCE120.100
SPCA210.100
SPCK620.100
SPCK623.100
SPCN110.000
SPCN310.000