Vanderbilt SPC53 Series User Manual

Engineer programming via the browser
17
Users
189
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Right
User Profile
Type Default
Description
RF Control
Standard
Manager
Access Control
User can control RF output
User Rights - Test
Bell Test:
Standard
Manager
User can perform a bell test to test the external bells,
strobe, internal bells and buzzer to ensure their correct
operation.
Walk Test
Standard
Manager
User can perform a walk test to allow for testing of the
operation of all alarm sensors on a system.
WPA Test
Standard
Manager
User can test a WPA.
Seismic Test
Standard
Manager
User can test the seismic detector.
User Rights – Service Engineer
Set Users
(Master)
User can create and edit other users on the system
with no restriction on user rights.
Set User
Profiles
User can create and edit user profiles on the system.
Set Calendars
User can configure calendars.
Set Doors
User can edit doors.
* Functions not enabled by default for this user but can be selected.
Access Control
1. Enter a Site Code, if required, for all cards assigned to this user profile. Refer
to the appendix section on Card Readers and Formats [➙ 354].
2. Select the Access rights of this user profile for the doors configured on the
system. Options are:
- No access
- No time limit (i.e. 24 hour access)
- Calendar (if configured)
Users
A list of users assigned to this profile is displayed. Click on a user to view or edit
the user’s details.
You can create a new user profile based on an existing profile by clicking
Replicate. A new User Profile page is displayed.

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English