Vanderbilt SPC53 Series User Manual

17
Engineer programming via the browser
Configuring Communications
270
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
2. Configure the following fields:
Modem settings
Country
Select the country that the SPC is installed in.
SIM PIN
Only for GSM. Enter the PIN for the SIM card installed in the GSM
module.
Allow Roaming
Select to enable GSM roaming.
Note: Changing this setting resets the modem.
Note: Supported on GSM modems v3.08 or higher.
Incoming Calls
The modem can be programmed to answer calls based on the following

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English