Engineer programming via the browser
Using the Fast Programmer
Installation & Configuration Manual
Downloading Configuration Files to the Panel
A list of the configuration files stored on the fast programmer is displayed along
with the options to download or delete them.
Uploading Configuration Files to the Fast Programmer
When uploading files from the SPC to the Fast programmer, you will be prompted
to delete the existing file on the programmer before the new file can be saved.
To upload a configuration file from the Fast Programmer to the SPC, enter the file
name in the file name box and click Upload.
For complete details on using the Fast Programmer with SPC Pro, consult the
SPC
Pro Configuration Manual
.
Upgrading Firmware
Manufacturer Access is required for firmware operations.
A list of the firmware files stored on the Fast Programmer is displayed.
To upgrade firmware, click on the Upgrade button beside the required firmware file.
To Next Page
Loading...
Need help?
General
