Accessing web server remotely
Installation & Configuration Manual
To activate this dial-up connection:
Click on the icon located in the Control Panel > Network Connections window.
The PC makes a data call to the PSTN line connected to the SPC PSTN
module.
The SPC PSTN module answers the incoming data call after the
designated number of rings and establishes an IP link with the remote
computer.
The SPC system automatically assigns an IP address to the remote PC.
For some Windows operating systems, a dialog box regarding Windows
certification appears. Vanderbilt
deems this acceptable to continue. For further queries, please contact network
administrator or a Vanderbilt
technician.
To obtain this IP address:
1. Right click the dial-up icon.
2. Click on the Details tab.
The IP address is displayed as the Server IP address.
1. Enter this IP address in the address bar of the browser and click.
2. When the Dial-up connection icon is displayed on the task bar of the PC, open
the browser and enter the IP address of the SPC.
The browser logon screen is displayed.
To set up a dial-up connection on another operating system, consult the help
menu of that operating system.
To Next Page
Loading...
Need help?
General
