Veeder-Root TLS-450 - Page 122

TLS-450 Setup and Operation Screens Manual
111
Allowable selections: See Table 1 below. Default: Environflex PP1503/2503
TABLE 1.
Pipe Type
Line Length, 1.5 Diameter Line
Length, 2.0 Diameter Line
Length, and 1st Line Length
Fields
2.5 Diameter Line Length, 3.0
Diameter Line Length, and 2nd
Line Length Fields
2/3 IN. FIBERGLASS
10 - 500ft (3 - 152m)
10 - 220ft (3 - 67m)
2 IN. STEEL
30 - 500ft (10 - 152m)
N/A
1.5 IN. ENVIRN GLEXII
10 - 500ft (3 - 152m)
N/A
OMNIFLEX CP1501
30 - 500ft (10 - 152m)
N/A
OPW PISCES SP15
10 - 500ft (3 - 152m)
N/A
OPW PISCES CP15
10 - 500ft (3 - 152m)
N/A
WFG COFLX2000 RIBBED
10 - 500ft (3 - 152m)
N/A
ENVIROFLEX PP1503/2503
40 - 500ft (12 - 152m)
40 - 350ft (12 - 106m)
OMNIFLEX CP1503
30 - 500ft (10 - 152m)
N/A
1.5/2 IN. ENVIRN GFLXD
30 - 500ft (10 - 152m)
30 - 350ft (10 - 106m)
APT P175SC
20 - 1100ft (6 - 335m)
N/A
OPW PISCES CP15DW
30 - 500ft (10 - 152m)
N/A
OPW PISCES CP20
30 - 500ft (10 - 152m)
N/A
OPW PISCES SP20
20 - 1100ft (6 - 335m)
N/A
USER DEFINED
20 - 1100ft (6 - 335m)
20 - 1100ft (6 - 335m)
PETROTECHNIK UPP EXTRA
63MM
20 - 1100ft (6 - 335m)
N/A
Line Length
This field entry is the length of the piping between the tank and the dispensers. It includes the length
between the check valve and where it connects into the product line. Line lengths are integer
values. Values are in foot or meter increments depending on system units.
Allowable selections: See Table 1 above
Default is 0 and will cause a data setup warning.
1.5 in Diameter Length
Allowable selections: See Table 1 above
Default is 0 and will cause a data setup warning.
2.5 in Diameter Length
Allowable selections: See Table 1 above
Default is 0 and will cause a data setup warning.
2.0 in Diameter Length
Allowable selections: See Table 1 above
Default is 0 and will cause a data setup warning.
3.0 in Diameter Length
Allowable selections: See Table 1 above
Default is 0 and will cause a data setup warning.