Veeder-Root TLS-450 - Device Setup - Line Pressure Sensor

TLS-450 Setup and Operation Screens Manual
60
Device Setup - Line Pressure Sensor
This screen allows you to setup Pressurized Line Leak Detection (PLLD) pressure sensors that have
been connected to the console.
Configured
Allowable selections: Enabled, Disabled
Default: Disabled
Address
Allowable selections: Choose from drop-down list of available Line Pressure sensors, Not Assigned
Default: Not Assigned
Label
Allowable selections: Up to 20 alphanumeric characters
Default: Blank
Serial Number
This is a read-only value.