TLS-450 Setup and Operation Screens Manual
253
• Test Complete
• Test Delay
• Test Pending
• Testing at 0.1 (0.38)
• Testing at 0.2 (0.76)
• Testing at 3.0 (11.3)
Pump (state)
On, Off
Handle (state)
On, Off
Pressure (measured on line)
Value range: -14.000 to 99.999 psi (-96.485 to 689.173kPa)
PLLD Status - Refresh Rate
The PLLD Status screen will be refreshed every 4 seconds.
Control Buttons (right of screen)
Setup
Touch this button to open the PLLD Setup 'Pump and Line Setup - PLLD' screen
.
Diagnostics (line pressure sensor)
Touch this button to open the LPR Diagnostics - Communication screen
.
To Next Page
Loading...
Need help?
General
