Veeder-Root TLS-450 - PLLD Diagnostics - No-Vent Aborts; Report Column Descriptions

TLS-450 Setup and Operation Screens Manual
258
PLLD Diagnostics - No-Vent Aborts
The No-Vent Test Aborts Tab of the PLLD Diagnostics interface displays a report with No-Vent Test
Aborts information about all lines with PLLD in the system.
This screen will only be available if the 0.2 gph (0.76 lph) or 0.1 gph (0.39 lph) line leak test features are
available.
Report Column Descriptions
# (PLLD line identifier)
Device code followed by 1 to 32 (e.g., Q1)
Label (PLLD line label)
Label (assigned in setup)
Test Aborts
Number of Tests that were aborted because of a 'No-Vent' failure.
Value range: 0 - 99