TLS-450 Setup and Operation Screens Manual
198
Allowable range: 0 to 264,172 gal (0 to 999,999L)
Mass
This column will not display if the probe does not measure density.
Allowable range: Depends on tank volume and fuel density
Fuel Density
This column will not display if the probe does not measure density.
Allowable range: 42.139 to 56.185 lbs/ft
3
(675.00 to 900.00 kg/m
3
)
Fuel TC Density
This column will not display if the probe does not measure density and if TC density is not enabled.
Allowable range: 42.139 to 56.185 lbs/ft
3
(675.00 to 900.00 kg/m
3
)
Fuel Height
Allowable range: 0 to 390.0 in. (0 to 9906.0mm)
Water Height
This column will be blank if the probe does not measure water.
Allowable range: 0 to 390.0 in. (0 to 9906.0mm)
Fuel Temp.
This column will be blank if the probe does not measure temperature.
Allowable range: -40.0 to 140.0°F (-40.0 to 60.0°C)
Control Button (on right of screen)
Select Range
Touch this button to modify (filter) the contents of the report.
Period
Default selection: All Records
Tank
Default Selection: Current Tank
To Next Page
Loading...
Need help?
General
