Veeder-Root TLS-450 - Printer Setup Screen 2; Setup a Printer with the Get Printers Button

TLS-450 Setup and Operation Screens Manual
182
Printer Setup Screen 2
Setup a Printer with the Get Printers Button
• Touch the Get Printers button on the right. The button dims to indicate that the console is
searching for printers.
• When the button is not dimmed you can select a printer from the available printers listed in the
Printer drop-down list.
• Set the Is Default field to Yes or No. The default printer is the first to display when you touch the
Print Button on the top of the screen.
• Enter a Label for the printer. The console will display this label when you Print, display the Printer
Status or display Print Jobs.
• Set the Driver Selection field to Manual driver selection if you want to select a Driver from the list
of available drivers. Otherwise the console will choose the driver automatically based on the
printer.