TLS-450 Setup and Operation Screens Manual
195
Inventory Reports
Inventory Reports - Current Inventory
The Inventory Reports - Current Inventory screen lists inventory data for all currently active and
configured tanks.
Note: References to probes are for probes that assigned to the tank. If the tank has no assigned probe,
and probe data is not available, the related field(s) will be blank. For fields that are dependent on the
capabilities of the probe, the column headings will print but the field will be blank, e.g., Water Height for
probes that do not have a water float. In the All Tanks view, where it is possible that a site is configured
with probes with different capabilities, some tanks will report temperature and/or water and some may not.
Report Column Descriptions
Fuel Volume
Allowable range: 0 to 264,172 gal (0 to 999,999L)
Fuel TC Volume
The Fuel TC Volume column will not be displayed unless the Print TC Volume feature is enabled in
System Setup and the probe measures temperature.
Allowable range: 0 to 264,172 gal (0 to 999,999L)
To Next Page
Loading...
